400s 0 Report post Posted February 9, 2019 Anyone with the Dwell times for Denso 099700-2550 COP (wasted spark) which is running on an evo 5? Thanks Steve. Quote Share this post Link to post Share on other sites
400s 0 Report post Posted February 11, 2019 Anyone? Quote Share this post Link to post Share on other sites
Adamw 600 Report post Posted February 11, 2019 It looks like a toyota coil similar to the common 1ZZ/1NZ coils. Import the table below is what I have used with success. They are saturated by about 2.4ms @14V but they dont like to run that high for very long - especially if run wasted spark they will overheat quickly. So this dwell table runs them 2.1ms most of the time then just bumps it up near the peak torque area where it may be needed. 90919-02240 dwell.lte Quote Share this post Link to post Share on other sites
400s 0 Report post Posted February 11, 2019 Thank you Adamw. will try it out later today and let you know how it goes. Steve. Quote Share this post Link to post Share on other sites
MarcD 5 Report post Posted February 24, 2019 hi Adam would it be suitable to use the same dwell table for toyota 1NZ coils running on MX5 1.6 supercharged, wasted spark setup? Thanks Marc Quote Share this post Link to post Share on other sites
Adamw 600 Report post Posted February 24, 2019 7 hours ago, MarcD said: hi Adam would it be suitable to use the same dwell table for toyota 1NZ coils running on MX5 1.6 supercharged, wasted spark setup? Thanks Marc Yep. Quote Share this post Link to post Share on other sites
MarcD 5 Report post Posted February 25, 2019 Thank you! Quote Share this post Link to post Share on other sites
Demetris 0 Report post Posted April 25, 2019 On 2/11/2019 at 9:19 AM, Adamw said: It looks like a toyota coil similar to the common 1ZZ/1NZ coils. Import the table below is what I have used with success. They are saturated by about 2.4ms @14V but they dont like to run that high for very long - especially if run wasted spark they will overheat quickly. So this dwell table runs them 2.1ms most of the time then just bumps it up near the peak torque area where it may be needed. 90919-02240 dwell.lte Can you please upload again the table ? Quote Share this post Link to post Share on other sites
