Jump to content
Fotis

G4plus honda

Recommended Posts

Hello there i am working on a customers vehicle using 92-95 plug  in obd1 link g4+ ecu and i would like to ask you which are the pin out of the triggers on the ecu? having a traditional honda distributor the ecu uses only one wire from the distributor to determine the engine positions? 

 

Share this post


Link to post
Share on other sites

Actually, that is not quite right above.  Honda's distributor outputs a "rising edge" signal so the connections to our ecu are reverse polarity.

If you are fitting an aftermarket trigger, the Crank signal needs to go to pin B16, the cam signal needs to go to pin B12.  Our ECU doesnt use the TDC P/M.  ECU Sensor ground are pins B11 & B15.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...