Jump to content

Can lambda help


Recommended Posts

Hi all I have just purchased a can lambda kit to go with my link ECU. I have follow the instruction to wire it but I'm struggle to find the can device in my ECU.

I have wired the can high to pin 3 and I believe can low to pin 4 on the ECU side. Does that sound right? Is there something I'm doing wrong?

 

   Thanks

Link to post
Share on other sites

Hi I'll try it again. On the G4+ mini link it automatically adds some of the settings I might try and use the user defined instead. I wasn't sure at first if I was using the pins on the side of the connector. Ie when you mate the connectors together pin 4 on the ECU is pin2 on the canf connector if you get my meaning.

Thanks for the response.

Link to post
Share on other sites
6 hours ago, Bananawasp said:

Hi I'll try it again. On the G4+ mini link it automatically adds some of the settings I might try and use the user defined instead. I wasn't sure at first if I was using the pins on the side of the connector. Ie when you mate the connectors together pin 4 on the ECU is pin2 on the canf connector if you get my meaning.

Thanks for the response.

Attach your tune file, it sounds like you are doing something wrong.  It shouldnt add any settings on its own.

There is a Pinout for the CANF in the help file.  This is looking from the side you solder the wires into:

5EVfwxc.png

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...