FredMendes Posted March 4, 2019 Report Share Posted March 4, 2019 Link G4+ 300z plug and play, going for a crank wheel Trigger (custom made). Will a 36-1 wheel trigger work fine? On another note. Traction control trough a wheel Trigger sensor, also possible with link G4+? Thanks Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted March 4, 2019 Report Share Posted March 4, 2019 Yes - that will be fine. FredMendes 1 Quote Link to comment Share on other sites More sharing options...
FredMendes Posted March 4, 2019 Author Report Share Posted March 4, 2019 On another note. Traction control trough a wheel Trigger sensor, also possible with link G4+? Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted March 4, 2019 Report Share Posted March 4, 2019 Yeah - need a front and rear wheel speed. Careful not to have too many teeth on the wheel triggers though... Soon run out of frequency capability if you have 40+teeth. Depending on how fast you want to go, and how accurate you need wheel speeds, I'd go for 8-10 teeth ideally. Quote Link to comment Share on other sites More sharing options...
FredMendes Posted March 4, 2019 Author Report Share Posted March 4, 2019 I thought i would need 2 on the rear wheels (rwd car) only no? Only one and the other wheel may slip. Also is there any attention to the number of teeth regarding ecu compatibility? Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted March 4, 2019 Report Share Posted March 4, 2019 Ideally 2x rear and 1x front yes. A basic system will work fine with 1x rear and 1x front FredMendes 1 Quote Link to comment Share on other sites More sharing options...
FredMendes Posted March 4, 2019 Author Report Share Posted March 4, 2019 Awesome. Thanks man Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.