Jump to content
Sign in to follow this  
Daniel L

rx7 s6 omp control

Recommended Posts

Hi guys

I'm completely new to this so forgive me if i'm asking simple questions.

I've just fitted a plug and play g4+ to my rx7 and all seems well and I've had it running on the base map. Though i will be taking it to a professional to have it mapped properly once I've ironed out a few problems.

My question is, how do i disable the oil metering pump control? as i am no longer using it as i will be pre mixing. 

Also, the oem lambda is coming up as a fault, but reading into it this, it is common until it reaches operating temperature. I have set the low voltage warning to 0.00 to stop the code being thrown up but how can i tell if my lambda is actually working?  Or should i just ditch the oem one and get a wideband?

Thanks 

Dan

 

Share this post


Link to post
Share on other sites

For the Oil metering simply turn of the AUX outputs that are assigned to it (Aux 5-8) 

The O2 sensor will give a voltage around 0.8V when operating. Wideband is miles ahead and give much more accurate information.

 

Share this post


Link to post
Share on other sites

Thanks Simon, 

seems my lambda isn't working in that case, as I'm not getting any reading. or maybe i have a problem between the ecu and it. I'll do some investigating and hopefully i can get it working.

Thanks again.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...