JohnGee Posted March 14, 2019 Report Share Posted March 14, 2019 I have just acquired a LINK dash display and would like to set it up with my Vipec V88 ECU, I have downloaded the Vipec installation manual but still can't get the display to talk to the ECU so to display the running figures. I was told you have to do the set up also on a laptop connected to the ECU but can't find any instructions. Need help to set it up please. Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted March 14, 2019 Report Share Posted March 14, 2019 If you post you map ill try load the CAN info. I run the same dash on my G4+ Do you happen to know the Can ID number on the display link. Quote Link to comment Share on other sites More sharing options...
JohnGee Posted March 15, 2019 Author Report Share Posted March 15, 2019 Can id is 360 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.