Jump to content
Richard Hill

RX8 metering oil pump control

Recommended Posts

Good morning,

I am setting up a base map for an RX8, I have wired up the metering oil pump and assigned it to AUX 5,6,7,8 in PC Link.  How do I assign the input for the oil pump sensor?  In the RX7 I see it is an analog input with a table controlling the % of oil delivery.  The RX8 has a switch, how do I set up this switch in PC Link?  Do I connect it to an analog input and fudge the Oil stepper table somehow?

 

image.png.9b2c47d91fb6d74ac97c1b1261a838fe.png

 

Thanks in advance,

  Richard.

 

Share this post


Link to post
Share on other sites

I dont think you are going to be able to control that.  The rotary oil pump function and the CL stepper function both need positional feedback, they dont keep count of "steps" etc.  I have never seen an RX8 one but it sounds like it must be open loop, the switch is possibly just a home/reset counter type thing?  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...