FarShark Posted March 19, 2019 Report Share Posted March 19, 2019 Hi Folks, I'm looking for some clarification on the last piece of the puzzle to get the NGTR+ ECU installed. The search results show some conflicting posts (or rather differences in opinion), so I would like to have one definitive source at least for the NGTR+ users using the expansion pins. The Link Boost Control Solenoid is a 2-wire 12V solenoid. Questions: 1. I understand that one lead is to go to a +12V source, does it have to be an ignition 12V or can it be direct? (Does it matter?) 2. The second lead - Should it go to an Aux Output? Ignition (e.g. #Ign 7in attached image) or Reg Aug (e.g. #Aux11)? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Jeffersonc Posted March 19, 2019 Report Share Posted March 19, 2019 Just use the existing factory boost solenoid wires. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted March 19, 2019 Report Share Posted March 19, 2019 1. Has to be ignition switched live to prevent any back feed issues. 2. You can use either native auxs or spare igns, not all combinations are valid though. I usually go into pc link first and select the function I'm trying to setup on the pin I want to use just to check whether the function is available. The help file has an aux out allocation chart which should help. HTH, Richard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.