Jump to content
FarShark

Link Boost Control Solenoid Wiring to NGTR+ ECU

Recommended Posts

Hi Folks,

I'm looking for some clarification on the last piece of the puzzle to get the NGTR+ ECU installed. The search results show some conflicting posts (or rather differences in opinion), so I would like to have one definitive source at least for the NGTR+ users using the expansion pins.

The Link Boost Control Solenoid is a 2-wire 12V solenoid. Questions:

1. I understand that one lead is to go to a +12V source, does it have to be an ignition 12V or can it be direct? (Does it matter?)

2. The second lead - Should it go to an Aux Output? Ignition (e.g. #Ign 7in attached image) or Reg Aug (e.g. #Aux11)?

Thanks in advance!

Exp_pins.jpg

Share this post


Link to post
Share on other sites

1. Has to be ignition switched live to prevent any back feed issues. 

2. You can use either native auxs or spare igns, not all combinations are valid though.  I usually go into pc link first and select the function I'm trying to setup on the pin I want to use just to check whether the function is available.  The help file has an aux out allocation chart which should help. 

HTH, 

Richard. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...