Jump to content
motomattx

Dual fuel table setup

Recommended Posts

I have a simple question, when using the dual fuel table, is the percentage the percentage of fuel table one that will be used or the percentage of fuel table two that will be used at say a certain ethanol level.  For example if I set the axis to ethanol percentage and I want to run fuel map one at 50% and up ethanol and I want to run fuel map two at 80% when ethanol content is 40% or less how would that look as far as the numbers.

Share this post


Link to post
Share on other sites

I cant quite understand the last bit of your question, but the "fuel table ratio table" is "percentage of table 2".  So 0% in that table means it is using table 1 only (0% of table 2).  100% in there means it is only using table 2.  50% would mean it is interpolating exactly halfway between the two tables.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...