brad1995 Posted March 23, 2019 Report Share Posted March 23, 2019 Hi guys this is my first time using a link ecu and my car is going for tuning in a few weeks and I have a link 3 port MAC valve and I was wondering what ports on the valve should be plumbed to what. The turbo is internally wastegated so only has the one nipple on the actuator. Thanks, Brad. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted March 23, 2019 Report Share Posted March 23, 2019 Port 1 goes to air, port 2 goes to the actuator, and port 3 goes to your boost source. 0% in the wastegate table will be actuator pressure and 100% will be maximum HTH, Richard. Quote Link to comment Share on other sites More sharing options...
brad1995 Posted March 23, 2019 Author Report Share Posted March 23, 2019 Thank you for the help Richard! I appreciate it. Brad Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.