Jump to content
brad1995

MAC valve plumbing

Recommended Posts

Hi guys this is my first time using a link ecu and my car is going for tuning in a few weeks and I have a link 3 port MAC valve and I was wondering what ports on the valve should be plumbed to what. The turbo is internally wastegated so only has the one nipple on the actuator.

Thanks,

Brad.

Share this post


Link to post
Share on other sites

Port 1 goes to air, port 2 goes to the actuator, and port 3 goes to your boost source.

0% in the wastegate table will be actuator pressure and 100% will be maximum 

HTH,

 Richard.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...