radford212 Posted March 30, 2019 Report Share Posted March 30, 2019 hoping someone can help me, just finished fitting an rb26det engine into my R32, want to get it running to make sure the freshly built engine is all ok before I take it off for mapping, don't suppose anyone has a basemap I can load up to test it out? mods are 875cc injectors holset hx35 Thanks, will Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted March 30, 2019 Report Share Posted March 30, 2019 Try the gtr plug in basemap that comes with pc link, it's in the base maps folder. Then scale the master fuel to your injectors, which should get you in the ball park. HTH, Richard Quote Link to comment Share on other sites More sharing options...
gtihk Posted April 1, 2019 Report Share Posted April 1, 2019 I do not know what ECU you are using. You can use the plug in base map as a start file but make sure that your inputs and outputs are matching. In particular, you need to look at MAP sensor allocation and calibration as the plug in uses an internal MAP sensor. Quote Link to comment Share on other sites More sharing options...
Gsab Posted April 11, 2019 Report Share Posted April 11, 2019 Dont worry with the Supra file name-this is currently in my RB26 S14. Should get your basics done. Thanwa 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.