Jump to content
Turbakias

Trigger pattern/Dwell time

Recommended Posts

Hello to everyone,can somebody take a look at my trigger scope log please,to tell me if its ok?i use 60-2 trigger wheel and 1 tooth cam signal,

and my next question is about the Dwell time,i use external ignitor module(Bosch) to fire a double coil in wasted spark modus,and see even though selected dwell settings to duty cycle,a dwell time when engine is running in idle of about 22ms?is that normal?i mean in another same engine with the same ignition coil but differend ecu and no external ignitor module,i set the dwell time to 3ms,may my thinking/understanding about this is wrong?

It`s my first Link ecu that i work with,so i need a little help please-)

ECU is a Black Storm

Greetings from Greece

Log 2019-04-6 4;14;19 pm.llg Trigger Scope Log 2019-04-6 4;11;55 pm.llg Trigger Scope Log 2019-04-6 4;06;39 pm.llg

Share this post


Link to post
Share on other sites

Your crank sensor is wrong polarity, swap the +/- wires.  Your dwell mode should be set to "ms" mode, duty cycle mode is for ignition modules that do their own dwell control or CDI systems.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...