selimusta Posted April 10, 2019 Report Share Posted April 10, 2019 Hi As I mentioned, I have a 6-32v buzzer.I want to connect it to one of the aux outputs and use it as a warning for shift light and low pressure. The help file has confused me. With GP Output If I connect the positive end to the ignition and connect the ground end to the AUX inj6, would it be right? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2019 Report Share Posted April 10, 2019 49 minutes ago, selimusta said: With GP Output If I connect the positive end to the ignition and connect the ground end to the AUX inj6, would it be right? correct. Quote Link to comment Share on other sites More sharing options...
selimusta Posted April 10, 2019 Author Report Share Posted April 10, 2019 Thanks. Quote Link to comment Share on other sites More sharing options...
selimusta Posted April 12, 2019 Author Report Share Posted April 12, 2019 Hi all this device hooked up from inj6 aux. Works well, comes into play where I want. But there is noise , for example, it makes noise with the wiper switch. Is this because of inj aux? I had previously tried with aux 5-6. At that time there was a slight noise as long as the ecu was open. Is there a way to clear this noise? I need your help with this. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.