Fotis Posted April 10, 2019 Report Share Posted April 10, 2019 Can i use LINK G4+ to control 2 spark plugs per cylinder? Engine: Duke x690 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2019 Report Share Posted April 10, 2019 Do they fire at the same time or is there an offset between the two sparks? Is it a single cylinder? Quote Link to comment Share on other sites More sharing options...
Fotis Posted April 10, 2019 Author Report Share Posted April 10, 2019 Yes it is a single cylinder. They fire at the same time. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2019 Report Share Posted April 11, 2019 Should be no problem then. You can either use a dual post coil or two seperate coils. ECU setup will be just like a single plug engine. Before getting committed too deep though it would pay to check the trigger pattern is supported as I vaguely remember some of the KTM's use MAP for the sync which you cant do with our generic trigger modes. Quote Link to comment Share on other sites More sharing options...
Fotis Posted April 11, 2019 Author Report Share Posted April 11, 2019 Alright thanks Adam we havent discuss what engine we will run (Formula student ) i will check it and let you know.If we go with another engine i will ask you if the trigger patern is supported Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.