Jump to content
AnWaRi996

Wiring AVCS into a WRXlink 6+ and other cam position problems

Recommended Posts

Hey guys, I'm trying to wire a V8 EJ207 into a WRXlink 6+, and I currently have one expansion connector at my disposal. I need to wire in two AVCS solenoids and two cam position sensors. After a bunch of reading, I've found out that the solenoids need to go to AUX1-4 (which works because I've changed my IACV to a solenoid instead of the stepper), and I can use the two DI on my expansion loom for the two cam sensors.

My question is, as stupid as it sounds, where do my second wires go? do my cam sensors merge and go to the common 5v output on the expansion? And where do my solenoids ground to? Do I make a local ground for them or is there a pin I could tap into?

Also, without considering the AVCS cam sensors, my car is throwing a cam position sensor code and I'm getting no spark on the factory EJ205 MY99 ecu. I feel as though it's highly likely this is because the cams are different in the 207 so it's getting weird readings from the sensor, and I'll need the link in with a tune before it runs. Just chasing a second opinions either calling me an idiot or agreeing on that one.

Thanks heaps

Share this post


Link to post
Share on other sites

I think I have already answered most of your questions via the tech support case.  

The OEM ECU definitely wont be happy with the latter engine as it uses a completely different trigger pattern.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...