gtihk Posted April 17, 2019 Report Share Posted April 17, 2019 I am trying to install CAN Lambda to a Civic EG with plugin ECU. I followed the instructions and added a dedicated relay with the correct gauge wire. I am seeing errors 16, 33 and 34. I even added a 35v 22 uF capacitor as suggested. Still no luck. Anyone? Quote Link to comment Share on other sites More sharing options...
JMP Posted April 17, 2019 Report Share Posted April 17, 2019 did you drop or knock the sensor at any stage when installing? Quote Link to comment Share on other sites More sharing options...
TechDave Posted April 17, 2019 Report Share Posted April 17, 2019 terminating resistor on the CAN Bus? Quote Link to comment Share on other sites More sharing options...
gtihk Posted April 18, 2019 Author Report Share Posted April 18, 2019 Sensor was brand new from the box. Not dropped once. Resister in place. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 18, 2019 Report Share Posted April 18, 2019 Try powering the unit of a jump pack or stand alone battery and if you can try another sensor. Quote Link to comment Share on other sites More sharing options...
gtihk Posted April 19, 2019 Author Report Share Posted April 19, 2019 I used the same sensor with a conventional Lambda controller. The sensor seems OK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.