FarShark Posted April 29, 2019 Report Share Posted April 29, 2019 Hi, I was attempting to see if I could change the injector type on my G4+ similar to the G4 (See pictures below) and also wanted to see which injectors the G4+ already has the data for. It looks like the G4+ doesn't give you an option to change your injectors? G4 (borrowed from another post) G4+ (my software) Is there an option somewhere to see what injectors I can pick from a list that the ECU already has data for? Thanks. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 29, 2019 Report Share Posted April 29, 2019 3 hours ago, FarShark said: Is there an option somewhere to see what injectors I can pick from a list that the ECU already has data for? No, there are no pre-defined injector calibrations - this is because injector characterisation has gotten much more complex than it was in the G4 days where it was just deadtime. Now for proper characterisation you have flow rate, short pulse adders, 3d dead times etc. This info should come from your injector supplier. Note the data for the predefined injectors that were in the G4 is still listed in the help file if you want it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.