Jump to content
Sign in to follow this  
tarlo

programmable logic

Recommended Posts

I would love in the future if you could step up virtual logic to be programmable perhaps in function block or text with Boolean (and and or if etc) to allow lots of flexability to the end user. the virtuals are great but can be limiting.  Thanks 

Share this post


Link to post
Share on other sites

I know its a bit of a bodge, but I've done this by using CAN inputs and outputs. 

You can output variables over can, do maths/programming/etc on your canbus device using the information, then send the variables back into the ECU. 

I do this to log a litres per 100km parameter into the ECU so I can view it in the logs with everything else (only cc per min is available otherwise) 

I've also used a canbus input as the load axis on an ignition table and had my device trim the ignition timing with more logic than is available on the ECU. 

Check out Teensy 3.6 and the IFCT library for it.
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...