The ECU is G4+ Fury, FW 5.5.7.2969, PC-Link 5.5.6.2942The car is a 2012 STi with full built EJ257 motor. I was tuning a 2012 STi's launch control yesterday, the car has been tuned on dyno.  During the first pull on the road, I found that the engine can rev to 10000 RPM! At first I thought that was related to LC or Shift Cut, then I turned LC and Shift Cut off, it can still rev over RPM limit I set.So I turned off the "Advanced Mode" of RPM limit and did a stationary full throttle test, it over r