Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 04/20/2021 in Posts

  1. dx4picco

    Percent increase shortcut

    Use the multiply (*) then type 1.1 to get 10% increase or 0.9 to get 10%decrease
    1 point
  2. Adamw

    Normalised knock

    I had a quick look over your log. I agree it definately looks like there is some mild knock in the 5000-6000rpm region on at least a couple of cylinders. The easiest test is generally to pull 5deg out of the cells around that area and if the noise levels flatten out then it is a strong suggestion it is knock. The delta threshold is getting tripped more often than it should be and in some places it looks like it is not getting tripped when it needs to be so I think the deltas still need a bit of work. Add these channels to you log will help see what is going on. I
    1 point
  3. You can find BMW Electrical Troubleshooting manuals for both an M50tu car and a 96-98 MS41 car, which will have detailed pinouts for the DME connector (X6000) The M52/S52 connector is slightly different than the M50. The "Hook" on the connector housing (opposite the latch) needs to be modified to clip together. I only know this because I used an M50 connector on a bench flasher for the MS41 ECU. It seems like the large and small hooks are flipped top & bottom to intentionally prevent insertion of the wrong ECU. This connector is now somewhat loose, but you may be able to clearance
    1 point
  4. I understand what you're saying. It just so happens that I tried this before seeing your message in this forum. I still felt like sharing my results despite that. I personally don't feel like it should be up to the user to have to disconnect from the ecu each time we power down the car to avoid these types of messages. I understand this may be a temporary software change to help figure out the disconnecting issue, so I'm not too worried.
    1 point
×
×
  • Create New...