Jump to content

driftninja

Members
  • Posts

    5
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

driftninja's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. @Reemen ya this works flawlessly. Will high idle at startup to what ever you want, then it will adjust with AC, PS, and cooling fans. Simple. If I cannot find the info saved I can walk you through it too.
  2. I’ll see if I can get you the info you need this evening. My car is not local at the moment but I think I saved a snip in my computer. The valve works awesome. I would use it over and over. You only need lik 2 wires out of that OEM harness and it frees up like 3 outputs. Not hard to dial in the idle table either. @Reemen
  3. Excellent thank you. That value makes a huge difference. Internet list everything from 100Hz to 350Hz, hard to get a definitive answer on the Ford valves. I started at the 200Hz per the Link Open loop help file, worked my way up to 300Hz and back down to 153Hz. Ill try 120Hz. Very sensitive idle but getting close i think. Pretty much just spending hrs adjusting the Base Table but will report back with working settings once achieved.
  4. I have a Supralink with a Ford IACV 2-wire installed. Trying to get the idle dialed in. Has anyone done this or have any settings available?. Basically i have switched 12v to Pin1 and Aux6 wired to Pin2. ISC Solenoid assigned. Unsure of the rest of the specs and frequency. Just seeing if anyone has made this happen and if so this would be great info for the next guy. So far car idle climbs from 1k to 3k RPM as engine warms up. Here are a few specs. Thanks in advance.
×
×
  • Create New...