Lemonslice22

Il check this over in the morning thanks.

I replaced the origional with a link 3 bar MAP sensor myself. The stock one is in my tool box.

Hi ive just done as you have said and the voltage is 2.79

Hi im trying to calibrate my MAP sensor which is a link 3 bar using stock MAP wiring. Ive selected the link 3 bar sensor from the drop down menu but when trying to calibrate it i have a fault - MAP Sensor Calibration command failed: Current map <5kpa or > 5kpa of baro reading. It says its using AN Volt 1 for MAP sensor. Can anyone tell some things to check or change in order to get this to calibrate. Thanks. Rob. 1

All sorted and unlocked. Thank you.

Right that was all fine then i realised it was the alarm playing up so my bad sorry. So im now sort of connected but it comes up with a notice saying i have to contact you guys for a code for some reason. Il attach a photo.

It was already plugged in to the socket shown in the photo you posted when i opened the packaging. Il pull it apart again and and make sure its plugged in properly and that the lights are coming on thanks.

Yes ive followed the instructions to the word.

Right ive uninstalled and reinstalled on the origional laptop ive also got another laptop that ive installed pclink on. Neither of them have link electrosystems usb like in the photo you posted. Is there a specific version i should download? I have the g4+ pluggin for the supra.

Mine doesnt have anything like ports Right ive just installed ports in my device manager but there is nothing to do with link in there. Can i just uninstall link software and reinstall now?

Apparently the first time you connect the ecu to the laptop its supposed to come up with driver installation. Mine isnt doing this it makes a noise when i connect/disconnect the cable but no drivers to install so i cannot connect to the ecu. What do i do now? Needed to get it running tonight for tuning soon. Windows 10 btw.