Skinnydactyl

Hey Adam did U get a chance to see that log algood if U haven't had time making sure U didn't miss it cheers again mate

here is latest log file fresh plugs still seems like its missing on one side of the motor Log 2018-09-20 7;21;40 pm.llg

No worries give that a go tonight and also do a lot of the ecu for you

Yea the old injectors were decaped so just to rule they r the issue I've got back to 440 as I no they r right It was running not great yesterday on the new injectors was alot better but seemed like it wasn't running on six as the nly one exhaust manifold was getting hot the other was barley warm but today it wouldn't even really cough Tacho can wait just another thing to tick off

still have no enjoy with this car i changed the injectors out for some stock light blue from a wrx 440cc seemed to help rail presure is set to 45psi injectors are 440 at 43.5 also put alternator back on car i fixed ethrottle issues wired the second cam sensor for vvt up not sure if that was issues but now to car wont run im at a lose at this point also cant get the tacho to work on my gc8 even it sent up as it should be once again guys thanks EZ30r v1.3.pclr

Log 2018-09-13 6;09;03 pm.llg

na errors r only really on start up it seem a little better starting to think i may have injector problem as no matter how much i take out fuel it seem tp be like 10.0 to 11.5 afr

is it normal to get some trigger errors

Thanks for the tips guys will try that today im running at return system with a rising rate reg also i am running 810cc injectors but will give it a go with the changes thanks again

HEY guys im in need of a base map to suit my ez30r 06 engine can get it started but wont rev pasr 3000 or idle only runs at like 2000 2500 rpm thanks again [email protected] EZ30r v1.0.pclr

Hi all I'm trying to set base timing on my ez30r but i don't seem to have a mark on the harmoncy balancer just wondering wether any of you might have some idea Cheers Brendan

Hey any chance u could send me a copy of the map to [email protected] cheers

figured it out was missing the ground to sensor derrr thanks

Hey does anyone have a base map for ez30r to suit g4+ Xtreme red Also have issues get cam sensor to show a signal Any help greatly appreciated Brendan [email protected]