Shane13bpp

Any help guys I'm trying to get my 13b started up. I'm trying to set up base timing but only getting spark from l1 and t2. I've set up all settings as told. Only thing I had to do different was lower the arming threshold volts on trig 1 and 2 to .2 volts instead of .5 as I was getting no spark at all until I lowered the values. I've tested all coils on the ignition test setting and all working. Any ideas?

Cheers for that. Didn't know the program had so much info on wiring!! so I've got cas,coils,tips,water temp and airtemp wired up. I'm stuck with injectors. Do I bring each injector wire from the ecu to one side of the coil and what do I do with the other pin out on the injector?

Just purchased a link monsoon. So I'll be asking a few questions regarding wiring it into the car(fd rx7) for the minute I just want to wire in what I need to get the car up and running. So coils, air temp,tps,cas, and water temp. I will be in the future fitting flat shift to the seq gearbox. Injectors in running 1 Injecter per throttle body. Where do I Earth the negative on the injector? ill be fitting 4 aem smart coils. To what colour wires should I assign to each coil? On the cas I have 4 wires. What wires from the look should I be connecting up? I will have more questions as I go but this should get me started Thanks Shane