netprosto

Thank you. It's worked.

Hi! We have Link Evo 8 PnP and Evo 8 4g63 with kiggly racing 12 tooth trigger. And we have problems with engine start. Pops and bangs but no idle. We made trigger settings and offset calibration with timing light. We tried different settings (i.e. Rising edge on Trigger 2, because it is more centered between Trigger 1 Falling edges) We saw the strange thing - in direct spark mode timing light blinks every crank rev (2 times per cam rev). In wasted spark mode it blinks twice as often. I think here is the problem, but I don't understand why it happens. Trigger scopes and cranking log in attachment. Kiggly Cranking log.llg Trigger Scope Log 2020-06-18 10;19;42 pm.llg Trigger Scope Log 2020-06-18 4;39;22 pm.llg

Thank you!

Thank you so much! You can get me the config file of Motec C127 for Link Generic Dash or Generic Dash 2?

Hello! How I need to configure Link G4+ Evo PnP and Motec C127. I want to transmit AN6 signal from Link G4+ to C127. I made it. It's not working. What was my mistake? Thanks in advance for your reply! Link G4+ Config Motec C127 Config