eduard

hi skills had the same problem, i changed the E-Throttle 1 Target axis from x to y and did the calibration again and it worked.

Hello, When I take my foot off the gas the engine still delivers more fuel than it should be delivering,while driving the car and i change gears RPM jumps up, can you please explain what could be the reason? log and pclx link here https://we.tl/t-F0sV7hkdbG

yes fuel system is return-less, sensor mounted on the fuel rail

So I noticed that when I switch the gear the Engine speed ROC parameter runs away, does it look right?

hello, i tried a lot of things to solve this problem, well, I don’t get anything, I have data that when I reduce the ignition, this problem disappears, but at higher rpm the problem remains. what else can you try? I installed a petrol pressure sensor and at high rpm the pressure drops can this somehow act on this problem ? nwes log file https://we.tl/t-gdRMpo0LcJ

yes, all the plugs work, I just removed the original ecu and installed AltezzaLink

Yes, my car altezza 3sge has a factory electric throttle and everything works fine.

my tune file https://we.tl/t-Ds3DkMUXqz

Im using Denso ik22 spark plugs with stock ignition coils and wiring is stock too, ill upload file soon

It happens any time, when im trying to tune it disconnects sometimes it needs 15 min sometimes it disconnects every 10-15 sec, its same engine i havnt changed anything…

i have connection problem its disconnects and showing errors i changed USB cable 2 times and checked usb ports any advice?

thanks for the help, VVT started working

thanks for the help i will try it tomorrow and let you know what i get

Thank you but can you explain me why VVT is not working? What do you think its wiring problem or trigger?

hello, i saved the log files as you asked, i also installed a stock ecu no such problem, at 2500rpm this problem is much more visible as seen in the photo. all logs https://we.tl/t-WHyHkVDAg3 PC Datalog - 2023-01-5 1;59;51 pm.llgx PC Datalog - 2023-01-5 2;00;42 pm.llgx Altezza_SXE10_G4X_06.pclx

thanks for the answer, I will do it tomorrow, before that I had apexi pfc and there was no such problem, I changed the Injector Short Pulse Width Adder Table settings and it got a little better, but right now I have injector dynamic installed and I have set all the settings recommended by injector dynamic, as for the aps, shifting from 3rd gear to 4th gear is much faster than from 2nd gear to 3rd gear, because aps changes from 0 to 100 so quickly

hi happy new years. problem with rpm delay when I switch gears rpm go up 500-800 rpm depends on the rpm, it's not very comfortable to drive a car on low rpm, well, this is not a problem you can get used , the problem is that at high rpm when I shift from 3rd gear to 4th gear go up revs and turn on the fuel cut and when i step on the gas the injectors cut because the fuel cut went on, how can i fix this? log file https://we.tl/t-WCt56Osv4D PC Datalog - 2023-01-4 3;03;52 pm.llgx Altezza_SXE10_G4X_06.pclx

Thank you very much your advice helped and problem solved but now i have another problem outside is 0-3 celsius and outside temp sensor starts counting from 1 and going up to 40-41 celsius any suggestions how can i solve this problem?

hello, i have a problem with idling when releasing the gas pedal tps main sometimes 4.3% and sometimes 3.6% idling is always different from 1000 rpm to 900 rpm what is my problem ? PC Datalog - 2022-12-29 8;43;21 pm.llgx aa.pclx

thanks for the answer, to install the sensor in front of the throttle?

hello everyone, I purchased Altezza Link TEXT, I'm interested in where it will be correct to install the iat sensor, so Charge Temp Correction worked correctly. As far as I understand, there are two options, the first one is next to the throttle, second on the intake manifold, which one is the best option for the accurate operation of Charge Temp Correction? The second question is which of the sensors is better to use? BMW, AEM, GM which one will be fast responding ? Thanks

I understand thanks for the help

forgot to write sorry. Toyota Altezza sxe10 3sge engine 2000 year.

Hello can i install Link G4 + SupraLink on toyota Altezza 3sge motor? will the water temperature sensor and the rpm on the unit work for me? and what problems may I face?

Hey. I want to buy ALTEZZA LINK -TALT +, I am interested in if new version ( X for ALTEZZALINK TALT + ) will be released soon?