Victorgaragesmg

Yes indeed sir. Or like bmw m52 that hall in crank but frequency on home. Sometimes like that.

I understand that. I just want to learn how the link work. This is my forst time using wasted spark and semi seq or multipoint. I need to really understand how the ecu work. I am getting used to haltech, motec, fueltech maxxecu. Now i need to be able to work with link. And if i cant have trigger support. The 36-1 trigger also full custom made by myself. So i can aply it to other engine in the future if i dont have the trigger supoorted. Thanks adam. I will back asking u again of i got some other questions. You have been very helpful

ok got it as long as its 1uz i will pair as the factory other v8 pair as firing order? this all happesn when we use 4 drivers injector right ? how if i use 8 drivers from storm? will i just wired it according to cyl number ? say if i want to use multipoint or semi seq.

Thanks adam.. its worked fine. And run. So injection mode is always banked when no home is present ? Semi seq need home ? If i use the home signal. How should i wire the injectors then ? Like firing order pair ?

ok so INJ1 is 1 and 3 , INJ2 is 5 and 7 , INJ3 is 2 and 4, INJ 4 is 6 and 8 ? is this correct?

Can i ask the same question to adam. Should i wire the injectors like the ignition. Or by banked ? Run semi seq

Adam, should I pair injectors same as ignition as i use semi seq mode and wasted spark 36-1 trigger

Is there anyone can help me about there so many part number differences between coil number Are all red coil pack is the same ? Thanks

Is there any difference between audi red top coil ? I plan to change mine as well But so many part numbers

Got it Done sir thanks

Hey thanks I usually use tuner stuido ms to determine the base inj value So triggwr and home arm voltage are the same ? Done sir thanks

Thanks. Anyone here with more info please. As we know.. if running traditional. I gonna need base injection Anyone here have the base setuo cak for stock 1uz pleaze share. Tdc offset, trigger arm, and home arm voltages. Injector size.

Anyone have work with this ? 1st gen 1UZFE No vvti But i will make it to individual coil. Using K24 coils Can i still use the stock trigger pattern and home ? Which os 12 + 1 i think Thanks

Anyone have the base setup ? Im using k24 coils 8pcs And m122 superxharger 3bar gm map

Its only on the 3500-4000 under boost that is missfire.. 4500-6500 fine if I keep pushing the pedal.. It is slightly different from the tune table because i cant tune perfectly when i get missfire right ? This is still confusing for me.. please help me..