Slowgti
Members-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Slowgti
-
I plan on using a Mini Cooper electric pump. Does anyone have the canbus info for that?
-
Any idea on a time frame for a fury or thunder with the new X platform? Thanks
-
The oil Pressure light, from memory, is wired to the cluster from the filter housing. Are the cluster plugs seated in all the way? I've had problems on mk4 chassis' with the connector housing breaking and causing weird problems.
-
The wiring harness between the ecu and cluster
-
How is the wiring?
-
It sends the amount of reduction required.
-
Is it possible to initiate gear shift torque reduction via canbus?
-
That's a solid sensor. There are 15-20 cars local to me running the same one.
-
Does it plug into the obd2 plug?
-
Should be pretty simple, just input the temp vs resistance values. The manual is really good at explaining how to add it in to your the tune.
-
Do you have a part number or know what the base car it came off?
-
Negatory. Syvecs or ecumaster are the only 2 that I know that will work with a dsg trans.
-
I just enjoy trying different ideas and methods. Nobody builds a better mousetrap by building it the same way their father built it.
-
Has anyone played with one of these as a map sensor? Data sheet
-
I have been doing some research on the same thing, I am curious how this turns out.
-
Ok, I have access to a couple factory dsg cars. I don't know much about disassembly and coding, is this something I can hook up a can sniffer and sort out?
-
Hello all, I have a thunder ecu I am going to run in a Vw mk4 with a turbo 07k 5 cylinder. I have a conventional 6 speed manual trans already, I am curious about setting it up with a dsg transmission. I have found out syvecs can be setup to send the correct canbus info to the dsg mechatronic system. Has anyone here played with this on a link ecu? Thanks, Joel