jzwb420
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by jzwb420
-
-
I've just brought a digital dash and trying to set it up but it comes up with if ecus before 10000 require a hardware modification whi do I contact to get that done I'm in nz
-
Thanks for your help adam got it connected still had to use g4+ drivers with the latest g4 pclink software
-
Cheers man
-
Dowloaded drivers swt and says it's connected to pc so i went into pclink and it says this operation requires a newer version of pclink software
-
cheers will try that yep installing into default folder. im trying to use the pc link v4.43 as my link ecu has 2009 on the board so i assumed id have to use that pclink
-
-
Dw about that comment i thought wasted spark may have a different firing sequence so i couldnt run factory coils ive never seen a wasted spark setup
-
-
its a gts/gtr plug and play link g4 serial number #4333
-
got it sorted cheers but now it doesnt want to run properly on basemap
-
ive jst installed a link g1 v.2.5 into my s1 rb25det r32 i used the reload function to restore base map but it barely wants to start and it drives like a pig..does anyone have a standard rb25det base tune i could copy
-
I have a rb pnp v2.5 g1 but it wont connect to my laptop through serial link have tryed to change com port but pc wont let me
Ecu has power as car fired up
-
Jst brought a link g1 v2.5 plug and play also have the serial link/tuning interface and a 3 bar map sensor will i need any another sensors to tune it only after a mild tune
-
Can anyone tell me were i can find a base map for a rb25det or someone who can point me in the right direction
Rb20det,390cc injectors,25det turbo currently running a 25det ecu
Can hardware modification
in Link G4
Posted
I've emailed tech twice once on Friday and again on Monday but no reply