Jump to content

juanv08

Members
  • Posts

    2
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

juanv08's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. juanv08

    IS300 can issues

    Thanks for the info. Ended up finding corrosion in my dashboard wiring harness when I replaced my driver side under dash fusebox thinking the MPX unit was bad. Going to replace the dash harness when I remove the dash to paint or flock it. This with is300s know the sticky dash woes...
  2. juanv08

    IS300 can issues

    Hello everyone, I have the Panicwire/Xcessive Manufacturing link ecru for the 2002-05 is300 Auto to manual. I am running a modified stock 2jz harness to a 1jz vvti w/ ETCSi. Car runs fine no problems with drive ability. But I am having problems with my AC (switches from recirc to fresh air), outside ambient air temp does not read correctly (goes to “E”), coolant temp gauge works and then drops to its lowest value for a few seconds then back to reading correctly, fuel level will work for a few minutes and drops to E. Quite frankly it is annoying. Very annoying. Do not feel comfortable taking it to events because of the fluctuating coolant gauge. It will act up until I cycle the key and everything works correctly for a few minutes until it acts up again. There doesn’t seem anything to be triggering it. It is driving me nuts. I keep contacting the vendor, they have admitted I’m not the only one with this issue. Yet they keep saying they’ll look into it and that has been since March. Kan_tune_final.pclr
×
×
  • Create New...