Jump to content

MonsterMark

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by MonsterMark

  1. Hi Adam Thanks so much fro your response i did send the ecu serial number to the tech team and they sent me the G4+ link i first installed . picture of ECU serial number attached to help ID Thanks again Mark serial number 6149 thanks again for your help Adam
  2. I have a purchased a second hand ECU that is Mitizi evo plug-in. After contacting tech with the serial number they kindly and very promptly sent me a link to the software file.. PCLink G4+ V5.6.7.3632 once downloaded every time i try and communicate with the ECU it throws up this error message. (G4+) Error IDS not found in Data Base 1263,1264 Windows 10 home edition G4+ pc link (Options connections auto in tab is selected) ECU was stood for a few years after purchase due to family issues and building the car therefor i am unsure of the MAP or ECU status when powered it does trigger outputs for relays etc hence should be fine and is trying / booting I looked into info on the forum and i found it may be the older version software may be the key (Link). I downloaded this version and now when i try and communicate with the ECU it shows a speed of connection in the top right corner then issues a warning screen " you must use the correct manufacturers tuning software to connect to this ECU" it is therefor having some coms with the ECU i guess as more info than the (G4+) ECU software... or is it ? .... also managed to get this from the ECU Any help or guidance would be gratefully appreciated as i am trying to look at the config prior to final wiring and off to the Dyno
×
×
  • Create New...