Jamie_mk1

Changed the wires around, now have spark. Thanks for the help Adam!

Sure thing, attached. TriggerScopeLog220123.llgx

Thanks for the quick response Adam. I updated the arming threshold table as you recommended and it is now saying it has a signal. I couldn't swap the wires at the crank sensor plug just yet as I didn't have a pin removal tool (the dealer supplied the ECU and loom but isn't being very helpful). Pin removal tool on order I gave it a quick try to see if it would fire at all but still nothing, so I recorded a new log. Not sure if it is down to the crank sensor wiring though? PC Datalog - 2023-01-22 3;20;47 pm.llgx

Hello I am having trouble getting my Zetec (ST170 - zetec engine but with VVT on inlet cam) to start. There seems to be no signal on trigger 2, which I believe is the problem. I am trying to identify if this is a wiring issue, a sensor problem or something else. MAP, log and trigger log attached. Can anybody please give some advice? New to programmable ECU's so hoping its something obvious :-D Thanks, Jamie TriggerScopeLog 120123.llgx PC Datalog - 2023-01-4 1_01_03 pm.llgx original map JR TEST 2.pclx