B-Shine

Hello, We are in the proces of adding fresh air antilag to our car using the Turbosmart EALV with the BlackBox controller. Has someone already created the CAN streams for the Fury G4X for controlling this? Many Thanks, B-Shine Motorsport

Hi Adam, Everything works! Many Thanks.

Hi, i've attached the files, dash config and the custom can protocol. 1988354736_MXSB-ShineSciroccoMK3Launch.zconfig LINK_Link AIM B-Shine_@20220512_124424_001800.xc1

The EGT's are displayed in the ecu, i already configured this according to the manual. The only thing is the AIM can stream so I can display and log them.

Hi, Does someone have the custom CAN stream for my AIM MXS display. We use a Link Fury G4+ with a KMS EGT-CAN convertor. Kind Regards Bart van Schijndel

Hi Adam, Thanks for your help, it's working. Regards, Bart

Hi Adam, Both files are attached, Regards, Bart MXS B-Shine Scirocco MK3.zconfig Scirocco_MK3-BvS.pclr

We are using a AIM MXS 1.2, it uses RS3. I can program a CAN output on the dash and a receive stream on the Fury. But i can't find where to configure the input in G4+.

I tried to configure the analog input yesterday but I discovered that I do not have any analog inputs left to use. Is it possible to set it up with a analog input from my AIM dash?

So a switch in series should be sufficient to switch launch control off after launch.

Hi Adam, Thanks for your reply. Do i need a additional switch to activate/arm launch control? Regards, Bart

Hello, Ee are building a autocross car and we are using a Link Fury ECU. Is it possible to setup variable launch control with a detent switch, so we can choose between different RPM settings depending on the track surface. Regards, Bart