Harry buscema
Members-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Harry buscema
-
Ty for the help!
-
Looking into buying a second hand link g1 for a rb20det, would this ecu also be compatible with rb25det engines or only rb20det, thank
-
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
Yep thanks for all the help, having multiple clutch switches ment that Di 7 wouldn’t work, i couldn’t get Di 8 to work at all no mater what I tryed, ended up switching to Di 10 which worked as intended, -
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
Ok I’ll try that next, thanks -
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
Hi Adam, I’ve tryed your suggestion, I’ve linked photos of what the connecter looks like, so I’ve connected brown to green and di8 still shows as off, never goes active, I’ve placed a multimeter in between and it down 9.7v so it’s definitely grounding on the green cable -
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
Sweet ok I’ll try that thanks -
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
Have it set as just clutch switch, yep just holding to a ground bolt on the car to test it, -
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
Hi Adam, I’ve recently bought the expansion cable, a setup Di 8 with the settings, Off - ON - Low -Rising. Seeing a 10v output on the cable but Di 8 isn’t being activated when the cable is grounded. Any thoughts? Thanks -
Trouble with Digital Inputs not outputting 12v
Harry buscema replied to Harry buscema's topic in G4+
I see I see, any recommendations of which ports I can use for another 2 on-off switch’s?, I have a non-e throttle board. -
I’m using a evolink 4-8 and trying to hook switches up to DI 5-6-10 which are all next to each other, DI 5 works fine and outputs 12v with the settings pullup- ON / On level - low but I’ve wired DI 6 - 10 the same as 5 but can’t seem to get a 12v out to the switch, thanks
-
ow wow that's cool, can you explain to me how this system works? thanks
-
Hi, just looking for some advice on installing a rally style Anti-Lag onto a stockish Evo 8 motor, I read some forums explaining just to set it up within PCLink and some forums explaining the need of solenoids. This car is a track/rally car running the evolink 4-9 Thanks
-
thanks for the replay Adam, are was tuned about 2 years ago out of my ownership, its always had this start up issue from memory
-
Just looking for some help with tuning my cold start, engine is forged run on normal 98 fuel (here in nz), car start fine but rpm starts to fall followed by a large jump in rpm, it will do this on loop until the car drops to low and dies. I might of messed up the logging as I haven't done this in a while, let me know if you need anything else, Thanks Harry mains14.pclr startup.llg
-
thank for the reply Vaughan, would you be able to give me an example of how much i should be reducing from the ignition table? thanks
-
thanks for the reply Adam, i have just attached my logs, at around 3:20 is where the idle is high, thanks for all the help s14 expermental.pclr Log 2020-09-9 4;37;38 pm.llg
-
Hi there, Having trouble figuring out why when my car is above 77c my idle kicks up to 1.9k rpm from the target idle of 1.1k rpm. Is there any specific setting that I should be changing that would effect the idle depending on temperature? Thanks
-
Hi team, Wanting to setup a more aggressive rev limiter(flames and bangs) than stock. I guessing if you use ignition cut you would loose all power mid drift. If anyone could give me advice on what sort of setting would achieve this that would be great, thanks My setup: Link g4+ plug and play Forged Sr20det
-
Wow thanks that was really helpful, understand what your talking about now. I'll give that a go and let you know how it goes. Thanks again!
-
Oh wow I dident even pick up on that. Is they anyway I can manual changed it back to the low boost map? Thanks
-
think I've done so, please let me know if that's the wrong file. thanks
-
recently bought a S14 with a forged Sr20 engine and external waste gate setup. The MAP Kpa is reaching its limit at around 4.5k rpm as shown in the log. I've check all the vacuum lines and don't see anything that would be causing a problem. just wondering if anyone would know if it was something to do with the wastegate or something with the link software? Thanks Log 2020-06-30 10;27;16 pm.llg s14 base.pclr
-
Haven't done anything to fuel trim, I only have proper understanding of shift cut so that's the only thing I've been messing with, thanks
-
Hi there, Just looking for some help on how I should be setting up my ignition cut for my flat foot shifting set up, wanting to get as big of a flame as possible(for photography & cutting down on boost lag) I only just got it setup and was messing around with the percentage of ignition cut and have gotten mixed l results, at around 25% I got a massive flame but could never replicate it, at 45% I get a constant setup for ffs but not getting the flames I'm after, anything after 55% I get no results. Just wondering if retarding the timing or using a different setup would help? Thanks The ffs is setup using a clutch switch and a H pattern gearbox