MacMarco
Members-
Posts
4 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
MacMarco's Achievements
Newbie (1/14)
0
Reputation
-
Thank you Adam! I was blind since I had the "Dash cable" here and thought I had to use this. So I connected the display to the tuning port. I am gonna connect the display to the main B connector, thank you!
-
Hi guys, I have a problem with a Kms can display wired to my G4+ ecu. The display won't receive/show any data. I wired the Kms can display with the Can to dash cable to my ecu. Can high(white wire) and Can low (green wire) the other cables from the dash cable aren't connected. 12v and gnd for the display separately. I followed the steps in the ecu help to set it up in the Can settings menu(set id, transmit to kms can display and so on) As I heard are there problems with the Can to dash cable so i shortened the cable to about 200mm but the display doesn't work and there are no instructions in the Kms manual. Do I miss something? Do I have to set up anything else then the help page says? NG