Ming

hi did you manage to resolve the misfire issue? i ve the same issue.

i've tried loading the file so far its slightly better. About the AC idle side it still misfire when its turn on. AFR is around 13.5-14. Coils ad new plugs has been replaced but same issue occurs.

thanks adam will try this out and update.

ok ive setup the map and config all the required settings. i still have issue with misfiring when revving & also when AC was turn on its stumble and idle not right. attached new logs and map. AC on.llgx Reving01.llgx Subaru EJ2.7.pclx

ive done a relog one with AC on and one without can you help me check thanks. is the ethrottle correct after i did a calibration.

hi can someone have a look at my log. i cant seem to get my idle to stable down.

thanks will try this out

here's the setup

here's my log. im using AEM UEGO which is wired to the CAN in the ECU. Fitted just at the downpipe PC Datalog - 2023-09-7 8;07;43 am.llgx

hi guys would like to ask if someone can have a look at my log and why my afr isnt smooth? i've tried adjusting its still the same. BBA299 rev1.pclx

I've done with wiring but im not sure how to setup the can setup in the AEM software.

Yes I have the whole kit with the controller. How do I set it up to the ecu to control the kit? Is there a simpler way to let the ECU control when the methanol start doing its work.

Thanks bro I'll try this out.

Methanol Injection kit

hello i also need help setting up the AEM CD7 dash for fuel level link to the ecu. what setup can i use ? thanks

hi i need help wiring the aem methanol unit to the ecu. which wire should i use? or how did you guys set up for this. many thanks

hi can someone help or guide me in setting up the config for fuel level in pc link to aem cd7 dash. i've wire the fuel level sender to volt 7 in the ecu.

thanks i will try this first

yes this is what i meant. thanks for clarification. heres my log

Hi i encounter dip in my knock counter logs. is this normal or is there something wrong with my setup? im currently using Bosch sensor.

Ok thanks and last question what's the proper way to tune a pop and bang settings?

Thanks for the information guys but how about launch control ? Possible on a wrx v4?

Hi anyone here able to guide to setting up basic guide for road anti lag? I've tried alot of setup but doesnt really work. Attached is my map for reference. BAX8233 retune.pclx

Ive got high gain at table 4 how do i lower it down? more fuel or less ignition on the cell?

hi apologize again for the late reply. should i increase the gain for clearer view?