Clipto2000

yeah same issue as before. Just given crank wiring a decent pull and wiggle and nothing happened no stalling or anything. Still idling fine

hey guys, I had this issue back in May. took the car off the road to get everything look and replace anything that needed to be done. got told the wiring and sensors for the trigger kit were in good condition and the grounds were also good. They did find the crank sensor needed to be regapped. this was my last post about it. https://forums.linkecu.com/topic/16093-random-power-cut-while-driving/ warmed the car up this morning took it for a drive around the block all was fine until I pulled back into the driveway and it started to fault. have attached the following trigger scope pictures are from when its faulting, log and tune file. Isaac GTR.pclx trigger issue.zip

Trig 1 & 2 are set at falling. Car has recently been retuned for the new turbo.

TriggerScopeLogidle.llgx ive had this setup running for a couple years now with no issues until now. both cam and crank are hall effect TriggerScopeLog5000rpm.llgx

It has a prp trigger kit 12 tooth. Sweet will do that when I get home

log.zip

Hey guys, I’ve got R32 GTR with a link G4x. Was driving along last night and the tacho dropped to 0, lost power chucked up engine light then came back did it a couple more times then did it at idle. Checked the earths this morning everything seems to be fine, fuel pump wiring, relays and fuses are fine, no trigger signal faults. Didn’t want to fault when drove around the block, but checked it a couple hours later and it faulted while I was giving it some revs. Had laptop plugged into the ecu and logging when faulted no error codes/faults came up.

Abit of an update. looks like the unit is faulty. Tried a brand new one and boom it was reading the 02 sensor.

sweet will do. Thank you for the help so far. its much appreciated.

here ya go err26 no start.llgx

off the battery or just off the hardwire?

Hey Adam, heres the log from wiring to the battery. doesnt look like it changed from what i can see. lambda to battery.llgx

heres an updated log file after upgrading the alternator power cable. err26 part 3 - 2022-01-2 8;15;58 am.llgx

Nothing i know of had changed in my system. Blew the gearbox up and parked it up. but this weekend I did upgrade the alternator power cable to help if there was a voltage drop. Ill do what you tried this morning and see how that goes.

heres the log file for you. cheers err26 part 2 - 2021-12-30 4;38;06 am.llgx

Hey Adam, I seem to be having the same issue. The car had sat for year and just recently got it back and noticed i had error 26. ive tried cycling the power, charged the battery but still has the code. it was working before it went off the road. Here is the log file and tune file for you. err26 - 2021-12-29 12;54;03 pm.llgx 758.pclx