Jump to content

Suresh

Members
  • Posts

    3
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Suresh's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Changed the can I'd to 1400 and everything is working like a charm! To follow on, is there a way to get fuel level to be displayed over CAN using the factory resistance based float?
  2. Thank you for the quick reply Adam. I'll give these settings a crack either tonight or tomorrow morning and report back
  3. Hi guys, so I've just got my hands on a Haltech IC-7 dash. Im running a G4+ pnp for Evo 8. The dash is running current firmware and I have selected Link G4 from the configuration list on the haltech software. I am using the connection cable that is offered by haltech(came with the kit) plugged in to CAN1/RS232, 12v is coming from a switched acc/ign and ground is going to a chassis ground. On PC Link i am using the following settings (see attached image) but I have no data streaming to the dash at all. If I change the configuration to OBD2 on the haltech software i am able to get a battery voltage reading and nothing else indicating to me the dash is working and wired up correctly? Can some one point out what i am doing wrong? Thank you!
×
×
  • Create New...