Jump to content

Jaro22

Members
  • Posts

    10
  • Joined

  • Last visited

Recent Profile Visitors

95 profile views

Jaro22's Achievements

  1. Hi, I will have to wait now till next week as I’ve had neighbours noise complaints, but I have looked over the file and I had iat at 120c and fuel correction table on, so this will probably explain the lean condition. But ignition correction off. the trigger is Ross damper, and commercial cam one. im also unable to send you the tune copy atm as I have issues connecting to internet. another thing that I haven’t changed is the ignition delay which was set to 45 so it could be due to this.
  2. Is anyone able to post for me images of the correct set up for my rb25 for using the following? im having scattered timing and sometimes no start and backfires. I’ve been over it over 10 times and can not work out where the issue is, I have also checked trigger scope and this seems to be fine. trigger one, 992 cherry effect hall sensor with 36-2 teeth in one place, crank wheel, with out using resistor. trigger 2, is a cam key, shorter black 3wire hall sensor, also without using resistor.
  3. Adam or anyone, can please post default settings for link g4x? I have upgraded but seem to get no response from [email protected] regarding manual.
  4. Jaro22

    Script error

    I think I sorted it out, have r33 gtst g4x, old wire number 54 pin needed to be removed, this was the old egt.
  5. Jaro22

    Script error

    Just looking aux 9/10 supply volt shows 8.60v so too high, which wire is this
  6. Jaro22

    Script error

    I will send you a log but , it is now coming up with a 5v errror also, and I have done firmware update and reset the ecu completly, so this must be internal fault, I’m thinking will I have to send the ecu back to have it looked at ? It’s still jumping up and down with map TPS ect and temp, It’s also doing this on the factory base tune that link provides.
  7. Jaro22

    Script error

    I’m having this issue also car was tuned and all off sudden no start and some of the values are going crazy, what can cause this? Luckily yes. I’m about to go back to car and refresh the ecu to factory and see what it does.
  8. Jaro22

    Script error

    I’m having this issue also car was tuned and all off sudden no start and some of the values are going crazy, what can cause this? IMG_2192.MOV
×
×
  • Create New...