toy auto

have not changed injectors but was running incorrect dead times have found the Fuel table was different have fitted the G4 one now will try again on Wednesday night should i expect the settings to be close between the old g4storm on group fire and the new stormX on sequential if noting else in fuel system has been changed Thanks Tm

Thanks for that Adam start up -130 running over rich (black smoke) to get running smooth master fuel down to 4 which seems very low compared to 14 on the group fire set up which is the fuel table a brought over to the G4X before i adjust the fuel table down are i missing something? running map and scope attached Thanks Tim 1uzcustom running.pclx TriggerScopeLog.llgx.llgx

Hi Adam loaded in work fine apart from the solenoid cycles once on key on cant recall old computer doing that but fuel pump not on and may not have heard it when pump going is 1uz early stock reluctors but crank has been changed to a 36/2 that we were using for the wasted spark set up now got cam stock set up using L/H cam reluctor trigger 2 do we need to change back to stock 8 tooth crank wheel does injection seem right with change from multi point group to sequential do we need to change any other master fuel setting also do the dead time setting seem right for my Injector dynamics 1000cc Thanks Tim

Hi Adam can you give a check over the set up and see if it all looks ok was running a single crank trigger and wasted spark on coils and group fire now 8 efi coils and sequential early model 1UZ got trigger set up from VVTI map so dont no cam trigger same will attach old G4 map as well Thanks Tim 1uzstormx.pclx coils.pcl

Hi Adam been running your Bump control in my G4 and have upgraded to G4X and having a few issues setting the virtual Aux1 when i get to function only gives me a option off on or off no GP output option as could you do a upgrade of your set up text file for a G4x I have latest version off PC link Thanks Tim