Craig chung
Members-
Posts
14 -
Joined
-
Last visited
Recent Profile Visitors
186 profile views
Craig chung's Achievements
-
Craig chung started following g4x bmw
-
where can I run my signal wire for my electric fan in order for the computer to monitor it. any specific pin location or diagram.
-
good day everyone i have some 42lbs injectors 440cc. I just replaced them with 60lbs 660cc. how do I go and change the injector size to the correct settings.
-
which wire from the relay gets plug into pin 11, the 12v switch.
-
I would like to know which input do I use on my expansion loom for my ecu to activate my electric fan
-
I would like to know what would cause me to have that code on my ecu while the car was parked for a week and a half.
-
car was driving fine last week parked it. decided to move the car, crank but no start. I check fuel and spark all good. I scan the ecu and code 49 came up
-
Firmware I notice that my fuel pump was not coming on I check my fuses and they are all good. I even bridge the fuel pump to get constant power and had no power. I notice there was no fuel pressure on my fuel pressure regulator it seems like it's not got any voltage to send power to the fuel supply. Plus I hear a pulse coming from my coil pack harness. I check my engine harness and a couple of the wires damaged. I had replaced the damaged wire and still no fuel. I will be sending the error message from the ecu.
-
It's a g4x running on a e36 m50
-
Does anyone ever had their ecu got hot while driving. Temperature was at 168. Could not figure out why.
-
Hi there just bought my links ecu g4x for my m50 obd1 e36. I have a aem afr gauge 30-4100. Am trying to wire up the aem afr to my links loom kit. I would like to know where do I connect the white wire from the aem to the links loom.
-
Craig chung joined the community
-
Can someone send me a base map for the e36 m50 obd1