Jump to content

DenisAlmos

Members
  • Posts

    78
  • Joined

  • Last visited

About DenisAlmos

  • Birthday 06/03/1995

Profile Information

  • Gender
    Male
  • Location
    Grenoble, France

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

DenisAlmos's Achievements

  1. As my car as a circuit breaker it makes more sense to set the stepper motor reset at ECU wakeup than hold power anyway It’s not a problem for me to wait a second before startup
  2. Thank you @Adamw @dx4picco what engine code or model and year are you talking about?
  3. I'm using a V6 engine in a V4 WRX My problem is I can't control idle because the car wiring is a 3 wires for a solenoid I suppose and the throttle body is supposed to have a 4 wires stepper motor. Can you confirm if V3-V4 G4X is able to control a stepper motor? If not do you think another solenoid can fit the Subaru throttle body? I’ve been using rotational idle but engine don’t warm up over 50°C so it’s not ideal for a track day car.
  4. @koracingSorry for the late replay but my Google Drive was full so I couldn’t upload the logs. 1 – The information you asked You can found in this folder a log from July the 9th which is the log from the mapper and a log from August the 2nd which I’ve done static in my backyard. The mapper did the dyno runs during hot summer near sea level so I guess BAP was over 100KPa. The second log is also near sea level and BAP was 98KPa and it already had a CL lambda correction about 4%. I don’t have a log during testing in the mountains but I’ve manually adjusted the fuel map to match my Lambda target while CL lambda OFF. You can found this tune “after testing” in the folder and calculate the error by comparing the changed values. I remember subtracting 13 to 14% on the fuel map. https://drive.google.com/drive/folders/12QvmVxBooMJm385VUDnnn_vKtDrUil1a 2 – Replay to your observations The fuel used is pump ethanol, so yes it can vary on ethanol %. Unfortunately, the car didn’t had ethanol sensor at the time of the mapping. Thank you for pointing the fuel density and temp coef are wrong. The car now has a sensor but is still using the same mapping. What would be the best thing to do in your opining? Yes, he changed the injector dead times, I replaced the data from Injector Dynamics website. The mapper said Injector Dynamics are china’s renamed products … I use a fuel pressure regulator and I’m not confident in sensor wiring so I prefer it to be logged only for now. What would be your recommendation on fuel pressure usage? Do you recommend ”FP Sensor“ mode in this case? What does it change if the fuel pressure regulator gives the right fuel pressure difference? [My decisions before mapping, he changed nothing] I installed the IAT sensor in the manifold, is the charge temp still relevant? [My decisions before mapping, he changed nothing] You are right, I installed the oil pressure sensor just before going to the mapper and he didn’t set any protection on this parameter. I’ve now set it up myself. For the boost setup, I assume he did something because I can see boost dyno runs on the logs. Has the air temp was too high he probably deleted the boost setup and told me he can finish tune as soon as I put a front mount intercooler. I’m not going this route because of lag so I installed a much bigger scoop, I called the tuner every week for months but I’ve never had another appointment. He said yes every time but did nothing. If I understand, in your opinion I should not trust the mapping at all and restart everything? If the fuel map could not be trusted, nothing could be trusted right?
  5. To give you some news, the mapper answered “yes” every time I asked something but with no surprise, he did nothing to help. I tried the car and found out it was 14% rich. These is 2 raisons I see for this difference; the mapping as been done on a hot summer day, and I want on mountains to test in without seeing the cops, so air temperatures and atmospheric pressure were much lower. I measured 85KPA for BAP. What would be the best to do? Could changing the main fuel from MAP to MGP solve this out? Can you guys have a look? @Adamw @koracing @Vaughan@Confused
  6. Hi all, I'm working on an old rallycar and wanting to use it of tracks. Here is the setup: EJ205 with Wossner forged pistons, stock heads and VF34 turbo I went to a mapper and had to pay him before seeing the car becouse he also was the transporter. I discovered that the all boost table is at 10% so I'm unsure about his work. Can anyboy have a look and give me a feelback about this tune? What do you think this tune worth? https://drive.google.com/file/d/12XZaGnFIjnQUx_5tUUcxqRASKQ_uCI3W/view?usp=sharing
  7. @DerekAE86 I've never tried but you can combine the following formulas : Power=Force x Speed and Force=Mass x Acceleration It gives you Power=Mass x Acceleration x Speed but you need to use SI units So it's more problably something like : Power (kW)=Mass(Kg) x Accleleration(g) x 9.81 x Speed(Km/h) x 1000/3600
  8. Yes AN temp have a 1kohm or 10kohm pull-ups resistors So if I understand correctly, 1kohm is gonna give a 0.02V to 0.27V? Probably enough for the job
  9. I've made an Excel file with Deadtimes and Short Pulse adder tables for ID1050XDS injectors from the datasheet avalable on Injector Dynamics website. It makes easier copy/paste if you want to add this datas to your tune. You can have it here: https://docs.google.com/spreadsheets/d/1LNKgQv3tEpuumoaWQWqoRytuRwxU1WBL/edit?usp=sharing&ouid=107378830477024301864&rtpof=true&sd=true
  10. @Adamw isn't it possible to filter fuel level on the software? I guess the road cars do it and are not using filter right after engine start to immediately adapt after refueling. I want this to make easier my refuel on track side as I'll be alone with no team to calculate how much fuel to put and finish with a minimum of fuel.
  11. If any one wants to know, I tried to solder the power and communication wires of 3 USB cables to allow communication and charge on my Note8 and SpeeedStudio CAN analyzer but it didn't work. I'm using the OEM Samsung OTG adapter delivered with the smartphone for now and have no solution on how to display and charge in the same time.
  12. @jqvp thanks for answer. Wested spark on a G4X is interesting for me because I can use GD STI coil packs and an adapter to use the factory wiring harness. I'm not planning on rewiring the car for now so it's a cheap and easy solution. For the people interested, I've done the modification and it works.
  13. I also bought the SeeedStudio CAN to USB module to use an old smartphone as a DASH. About wiring, I was thinking to solder wires to supply 5V and split the wires for the USB bus. I would look like a T wiring with 3 different ends: power supply, smartphone and CAN module. Is it an option or is USB communication necessary for charging the smartphone?
  14. If I understand right you are not able to change your throttle kicker on and off from the cabin. Another French GC8 GrA owner sent me pics of this installation and he is using suspension cable command locker for mountain bike to activate or not the throttle kicker. I’m gonna try to set this system on my GrA and was just looking for more examples. Here is the suspension cable command locker: https://www.decathlon.fr/p/poploc-suntour-noir/_/R-p-187051?mc=8399892 Also, I noted with throttle always open, idle is too high to be controlled by ignition. Cyclic idle is necessary.
  15. After searching for a defective wire or connector pin, I didn’t found anything wrong with a multimeter. I’ve tested sparely the car harness and the engine harness or both connected together.The sensor resistance is 2050hOms. As my other GC8 sensor as the same resistance and runs great, I thought it’s not the problem.I pulled everything again and it works! The signal was back and the car started.I’m worried of the problem happened again just before a run at the track but what else can I do?
×
×
  • Create New...