mazrun

The error shows vvt signal error tolerance..i will provide tu the map

Thanks adam..problem solved..engine started n running freely. However non of vvt setup able to make it function correctly including user defined vvt setup..after cam test n adjust the vvt off set still doesn't work..

It is k3 3sz engine vvt. From Produa. It uses reluctor on crank and cam. I run g4+ with swift trigger

Some additional info here.. Trig1 and 2 using reluctor..i have play around with trigger arming to get best result. Both trig 1 &2 show green when cranking.ROC and engine speed positive show correct reading with no error counter..How ever still not able to start. As i said, The engine running fine and able to rev freely without error using link g4+ . Help is very much appreciated..thanks

hi. i have start issue on suzuki swift v2 vtc. attached is the trigger scope file. i had verified wiring for trigger 1 and 2 ignition and injectors. and i have no issue using G4+ xtream engine started successfully and no trigger error with the same setup. on link G4x i have no spark while cranking, but no trigger error counted. TriggerScopeLog.llgx.llgx MONSON MYVI.llgx swift monsoon.pclx