Jump to content

Ali Aswad

Members
  • Posts

    1
  • Joined

  • Last visited

Ali Aswad's Achievements

  1. Good morning. I'm working on a evo 1 with a brand new g4x plug in. Wired a fuel pressure sensor and a ethanol sensor of the expansion cable. The pressure sensor works fine. The ethanol sensor is wired to DI8 and have used the GND pin on expansion port Green wire for sensor ground, 14+ve is pick from a ignition source. Followed the wiring from the help file and turned the pull up resistor on edge is set to falling. Can't get the reading and in runtime valves DI internal status reads = fault ( inactive) Can some 1 point me in the correct direction. Same sensor on another car with g4+ works fine and have also tried another sensor which works from another car with no luck.
×
×
  • Create New...