awah

I have recently upgraded from G4+ WRX V4 plug and play to G4X XtremeX standalone. Previously, on the G4+, wheel speed was reading very steady there were no issues. On the G4X, the speed shows to be erratic, jumping around about +/- 1.5%. This causes issues with cruise control. The test was performed with both ecu on the bench, using the same wiring and same speed sensor - rotating with a cordless drill. Please see details in logs from G4+ and G4X. G4+ Wheel Speed Stability - Log 2021-01-23 1;10;48 pm.llg G4X GP Speed 1 Stability - 2021-01-23 1;03;59 pm.llgx WRX_EJ20G_2021_01_23_1.pclx WRX_EJ20G_2021_12_23_1.pclr

I am using the Subaru Cruise Switch type. I have my 'Cruise On Switch' set to DI 5. When online and having set to DI 5, the cruise on switch functions correctly. But, upon saving, storing and disconnecting with F3 and reconnecting again, the 'Cruise On Switch' resets to off. Even when offline, saving the file with DI 5 as Cruise On Switch -> Reopening the file, 'Cruise On Switch' source gets reset to 'off'. Changing switch type to Digital, the Cruise On Switch does not reset to off after saving and reopening. Appears to be a software bug if this only is affecting the Subaru Switch Type?