666_180sx

I have a G4 RX running with a haltech dash working perfectly over canbus. The problem I'm having is I also have an AIM SOLO2 DL that I'd also like on the canbus. The haltech dash receives on address 1400 but the AIM SOLO2 needs to receive on address 1000. I cant transmit the link generic dash stream on 2 different channels with different addresses due to limitations of the canbus on G4 RX. I've tried creating a custom can protocol in the racestudio software (attached to this post) but some channels dont work at all and the others flash erratically. Any help would be much appreciated. Revolution Engines_Custom - Peter F_@20220527_233655_003809.xc1

The resistance between the CAN H and L is 60 ohms at the ecu end and at the ABS plug.

Hi adam, Ive tried that updated map with no luck, I cant get anything on the dash to work, I cant even get the wheel speed sensors to read anything in the ecu. Ive triple checked the canbus wiring and even changed it round just to be sure. Not sure what else to try.

Has anybody tried using this can config on a g4x, I cant get anything to the dash to work. Ive attached a copy of the map. Jareds RX-8.pclx