Jump to content

JMc

Members
  • Posts

    3
  • Joined

  • Last visited

JMc's Achievements

  1. Hi guys, I have a G4+ Storm running an s13 SR20DET. I have started with the s13 base map, reassigned inputs and outputs, entered all data for injectors (Bosch 1000cc) ignition (yaris coils) and all sensors, as well as do the Nissan CAS test/set up as the help file says which gave good results. When trying to start the engine to set up ignition timing, it will turn on the starter but stop and back fire I believe when it tries to fire the coils. This goes away when disconnecting the ignition and I have tried to lock timing with no luck. It also doesn't change whether injectors are turned on or off so I'm pretty sure its ignition related. Attached is my pcl file if someone can have a look and point me in the right direction that would be great. Thanks SR20DET 180sx.pclr
  2. Awesome thought this might be the way to go, thanks Adam
  3. Hi guys, I have a redtop 180sx SR20DET with a Storm G4+ and want to know how to wire it to the ECCS relay. On the factory Nissan ECU I believe the ignition switched 12v+ goes to the ECU which then sends a trigger to the ECCS relay to turn on which then powers the ECU. The Storm only has a 12v+ input to power it but no ignition switched 12v+ input, so I assume that means it isn't able to control the ECCS relay the same way the factory ECU does? Please let me know what the best way to go about this is. Cheers, Jackson
×
×
  • Create New...