SDHVW

Has anyone already created a Knock target table and knock ignition trim for each cylinder for an EZ30R? Cheers

Cheers for the reply I’ll do another log, I believe the injectors are 280 Subaru part number 16611-AA680, so the master will be way out, do you know what I require for the injectors? yeah I noticed that later on, the idle base position table figures were really high along with the start up step table. cheers

Checked base timing I should be near enough there. I have used the V9 Subaru base map to start however that's a quad cam turbo motor with AVCS and the engine i have is NA twin cam with switched cams. So the tables are probably way out. Subaru EJ253 EThrottle.pclr Log 2021-02-20 4;08;37 pm.llg Trigger Scope Log 2021-02-20 4;12;23 pm.llg

Got an EJ25 N/A Gen 3 engine e-throttle on a G4+ Xtreme. In need of some help on the ignition timing or fueling as i cant get the sod to run. Does anyone have a base ignition map for an NA at all? Cheers

Cheers Adam, Given that a whirl this morning and she's not firing up, its like a timing issue as getting a pop now and then. I was able to record a log if you could have look with your expert eye that would be most appreciated. Cheers Sean Log 2021-02-17 9;40;25 am.llg

Hello, need a little help with creating a fuel table for an EJ25 NA engine, I started using the preset setup for a WRX as the engine I am using has VVT (cam switch not ACVS) and e throttle. Any help would be appreciated. Cheers Subaru EJ253 COASTVW Ethrottle possible.pclr